请选择 进入手机版 | 继续访问电脑版

手机数码

    今日:0| 主题:47364
收藏本版 (4)
手机、平板、VR等3C数码产品的交流.

[其他] Ultimaker 3 can 3D-print using two materials at once

[复制链接]
洛初≈ 发表于 2016-10-18 22:53:18
225 0

Ultimaker 3 can 3D-print using two materials at once

Ultimaker 3 can 3D-print using two materials at once-1-手机数码-extruders,structure,printing,material,indicate

One of the most popular (and, frankly, more interesting) applications of the dual-material capability is using the second nozzle to print integrated support structures that you can remove the inside of your printout. Ultimaker demonstrated how it was able to create a complicated cage-like structure by using a water-soluble material for the support structure against the nylon-based primary material. Then, by dunking the whole thing in water for a few hours (depending on water temperature and movement), the support structures dissolve, leaving behind a clean-edged product.
  

Ultimaker 3 can 3D-print using two materials at once

Ultimaker 3 can 3D-print using two materials at once-2-手机数码-extruders,structure,printing,material,indicate

To prevent the materials from crossing over each other mistakenly, the Ultimaker 3's extruders will also dodge each other if they get too close. They slide back up into their housing and stop printing, just like the way a turtle hides its head back in its shell when danger is near. Lights on each nozzle will indicate when the head is hot, cool and ready, so you won't have to hurt yourself when swapping out the cores.
The Ultimaker 3 also adds NFC readers to its spool racks, so it can automatically detect the material you've chosen and adjust its settings accordingly. It also offers automatic bed-leveling, and has a camera onboard so you can watch your project's progress without leaving your workstation.
  The new extruders can print up to 215mm x 215mm x 200mm each, while their output volume when used together is 197mm x 215mm x 200mm. The company is also offering the Ultimaker 3+ for larger build capacities, and it can produce a taller 197mm x 215mm x 300mm print. The popularUltimaker 2 and 2+ will continue to be available for $2,499 and $2,999 respectively.
我要投稿

回页顶回复上一篇下一篇回列表
手机版/c.CoLaBug.com ( 粤ICP备05003221号 | 文网文[2010]257号 | 粤公网安备 44010402000842号 )

© 2001-2017 Comsenz Inc.

返回顶部 返回列表